Gpu overclocking guide for asus k43ta

Keep an eye out for any graphics issues, artifacting and temperatures.

Gpu overclocking guide for asus k43ta

Apr 07, Written by: Hands On is an exciting time to need a graphic card upgrade. While these cards fill the news and people's upgrade anticipations right now, you don't need PCI-Express 3.

Downloads you will need: Select the sensor tab, look at the bottom and tick both the boxes. You will be prompted to select a default location for the log file it will be creating.

Gpu overclocking guide for asus k43ta

Why do we want this? This way we can check the history and then make informed calls on the correct way forward. Create a baseline Open your FurMark stress test - Select the profile you wish to run, I suggest you use the profile that will match as close to your gaming resolution.

I used the x p setting. Remember the point of this exercise is to establish knowledge of the baseline stability of your graphic card at stock speeds. You can use any of the pre-set profiles too, as long as you are using the same settings each time we do a stability test.

First: Memory Overclocking

Once we have these temperature numbers and are confident that the card is running perfectly at stock speeds, then we can overclock!

Memory Overclocking The first thing to do is see what the maximum memory frequency is. The offset value will tell you how far from stock MHz it's been changed. Open FurMark and run the benchmark preset that you prefer. If your system passes, increase the frequency by MHz on the slider again.

Apply and run FurMark again Repeat until your system fails the benchmark test or crashes. Drop back MHz from the last used setting using the slider Run the benchmark again to check If passed successfully stop there and record the frequency that your system passed the benchmark test successfully at.

Reset GPU Tweak to default We are not going to change any voltages in this basic guide until the very end. We now have the stand alone maximum memory frequency for our graphics card.

If your system passes, increase the frequency by 10MHz on the slider again. Drop back 10MHz from the last used setting using the slider Run the benchmark again to check If passed successfully stop there and record the frequency that your system passed the benchmark test successfully at.

How to overclock your graphics card | TechRadar

Once again we have is a known frequency that our GPU can achieve, but yet without voltage changes. Putting the Core and Memory together Now the moment of truth: Most of the time it will not be possible to get the max core frequency and the max memory frequency that we achieved separately to be stable at the same time, but we will try and get as close as possible.

If your system still passes, repeat but increasing the core up by 10MHz and memory by 25MHz each time. If your system passes, run the 15 minutes burn in test and keep an eye on your temperatures.

You have a stable overclock of your graphic card at close to the maximum that can be achieved without any additional voltages or special cooling. If your overclock did not pass the FurMark stress test then do the following. Open GPU Tweak Move the slider for the core to 75MHz below your maximum previously achieved Move the slider for the memory to MHz below your maximum previously achieve Open FurMark and run the benchmark preset that you have selected If your system passes run the 15 minutes burn in test.

Normally we can reduce the amount of voltage needed to achieve what we currently have.GPU Overclocking Guide for ASUS K43TA Essay WARNING BEFORE PROCEEDING I JUST SHARING MY INFO. IF ANY DAMAGE TO YOUR LAPTOP OR YOUR DEVICE, I WILL NOT BE RESPONSIBLE FOR IT.

Overclocking the best graphics card isn’t for the faint of heart. If you rush through it, and don’t treat your GPU with the respect it deserves, you can do some major damage to your hardware. Dec 25,  · Saudi Arabia: GPU for new build, crazy prices - page 3. The ASUS K43TA is phenomenal at cooling, many OC to Ghz with no problems.

STANDARD MODE

that is going to see some overclocking action soon. This guide explains the process of how to overclock your graphics card with GPU Tweak, and applies to Nvidia and AMD graphics cards alike.

Downloads you will need: First of all download the latest version of ASUS GPU Tweak and AMD Catalyst drivers to get support for the latest models.

* ASUS, the world’s top 3 consumer notebook vendor and the maker of the world’s best -selling and most award winning motherboards, is a leading enterprise in the new digital era. * Asus. Aug 09,  · overclocking GPU you have to download a program called Sapphire TRIXX and then go into the settings and disable ULPS and restart the computer.

then you should be able to use the sliders to overclock on any program including MSI afterburner which i like .

Buying new laptop? Need RECOMMENDATIONS?, V13